top of page
NEURO-DRIVE
1/1
FEATURES
-
2 layer PCB
-
Dimensions (W=55.88 mm x H=50.17mm)
-
Board mounted pot design
-
3PDT daughterboard incl.
-
Asymmetric clipping option.
-
Detailed printable PDF build docs
-
Recommended enclosure 125B
The Neuro-drive v1.7 PCB is a faithful recreation of the Fulltone OCD v1.7* circuit, traced from the real deal in my personal pedal arsenal. At the time of this writing, there was not an abundance of information on the 1.7 version of this circuit. So here is my humble offering to the DIY pedal building community. The Neuro-Drive PCB allows you to build a verified v1.7 circuit with an optional spot onboard for the asymmetrical clipping diode found in the earlier v1.4, just in case anyone is a fan of that build. This PCB keeps the same part numbering as the original circuit, so any references to part numbers when modding the original pedal translate over to this project.
- Shane Hammond
bottom of page